Seismic retrofits of diplomatic residences, post-earthquake assessment, and published geotechnical research — from the most seismically active mountains on Earth.
I am a civil engineer with two years of hands-on experience in seismic retrofitting, structural assessment and site supervision at Earthquake Safety Solutions, Kathmandu — currently supervising the retrofit of a diplomatic residence. I am now seeking graduate research opportunities in earthquake and structural engineering.
In detail: I currently supervise the seismic retrofit of an unreinforced masonry residence at a diplomatic compound — converting it to reinforced masonry through splints and bandages at critical structural locations. My work spans the full project cycle: detailed cost estimates and Bills of Quantities, checking and verifying contractor bills, construction management of residential and commercial buildings, and Total Station surveys of land, buildings and roads.
On existing structures I run non-destructive assessments — UPV, rebound hammer, rebar scanning, in-situ masonry shear and penetrometer testing. In 2023 I served as a volunteer field assessor after the M6.3 Bajhang earthquake, where field experience with Nepal's vulnerable building stock now drives my interest in research with real-world impact.
First Division · November 2019 – June 2024
A four-year program covering structural analysis and design, geotechnical engineering, hydraulics, surveying and construction management.
Key electives: Structural Dynamics · Earthquake Resistant Design of Structures · Disaster Risk Management.
Final-year project: full analysis and design of a multistorey building with foundation bearing capacity from Direct Shear testing — later developed into a published paper.
Languages: Nepali (native) · English (fluent) · Hindi (conversational).
From the estimation desk to supervising retrofits at diplomatic compounds.
↕ Click any role to expand the details
Supervision of a URM load-bearing building's conversion to reinforced masonry: reinforcement splints and bandages at critical locations, schedule control, QA/QC and certification documentation.
Detailed condition assessment of a URM building: in-situ masonry shear testing (horizontal jack method), penetrometer testing for mortar strength, and HILTI rebar scanning of beams.
Site engineering for an RC retrofit: column jacketing with additional rebars, new shear walls with specified detailing, and CFRP sheet application on beams for flexural strengthening.
Rapid visual screening across four sites: traditional housing (lintel/sill band findings, masonry delamination), two secondary schools, and the historic Byasikot Durbar — with retrofit vs. reconstruction recommendations.
Complete analysis and design of an RC multistorey building in Dhulikhel per NBC: ETABS modelling, seismic load assessment, member design, and mat foundation design with bearing capacity from laboratory Direct Shear testing.
Site supervision, non-destructive testing, earthquake response, and surveying — the work behind the CV.
Laboratory Direct Shear testing investigated as a practical method for determining foundation bearing capacity for small-scale projects. Shear strength parameters at optimum moisture content were applied through Terzaghi's equation to compare foundation requirements at two sites in Nepal.
"I am seeking MSc/PhD opportunities in earthquake and structural engineering. My field experience with Nepal's vulnerable building stock — in one of the world's most seismically active regions — drives my interest in research that translates directly into safer construction practice."
Professional civil engineering services for homeowners, developers and firms across Nepal.
End-to-end site supervision of residential and commercial buildings and road works — schedule control, quality assurance, compliance with approved drawings, and contractor coordination through to handover.
Whole-building seismic vulnerability assessment of existing structures using non-destructive testing — UPV, rebound hammer, rebar scanning, in-situ masonry shear and penetrometer tests — with retrofit recommendations.
Complete AutoCAD drawing sets for new buildings — architectural plans, structural detailing, and municipal permit (Naksha Pass) ready drawings compliant with Nepal Building Code.
Detailed cost estimates and Bills of Quantities for new construction and retrofitting — plus independent checking and verification of contractor BOQs and running bills to protect your budget.
Planning and site layout for new buildings — space optimization, setback and by-law compliance, and accurate layout transfer from drawing to ground at the start of construction.
Precise Total Station surveys of land, buildings and roads — land measurement and boundary verification, topographic surveys, and construction layout for project sites.
Open to engineering collaboration and graduate research opportunities — in Nepal and abroad.
Fill in your details and Prasang will receive your request by email and send the CV to you personally.